• open all | close all
  • Software Capture Application Integration with Delcom

    The Software Capture application can be integrated with a Delcom button for both visual status and support for a physical start/stop/pause button. The first step is to register the Software Capture application on the computer.

    Completing the Delcom Integration

    Once the device is registered, you can follow the below steps to complete the Delcom integration.

    1. Navigate to the Admin Panel from the Main Menu.
    2. Click on the Devices menu.
    3. Find your registered device and select it. Once you plug in the Delcom button, you will have the plus icon to activate the Delcom button. The button should then light up green.
    4. Use the following commands to Start, Pause and Stop the recording:
      Start = Hold for 5 seconds. The Delcom will light up Blue for an active recording.
      Pause = Hold for 1 second. The Delcom will light up Red, Blue and Green once paused.
      Restart = Hold again for 1 second. The Delcom will light up Blue again for an active recording.
      Stop = Hold for 5 seconds. The Delcom will go back to Green once the active recording is stopped.